In this article I’ll introduce you to the different types of chimney flues, materials and technological solutions. The main purpose is to remove the chimney into the atmosphere of the combustion products. Chimney creates traction under the influence of which is formed in the furnace air, which is required for combustion of fuel, and gases are removed from the furnace smoke. The chimney should create conditions for complete combustion and excellent traction. And yet it must be reliable and durable, easy to install and durable. And for this to choose a good chimney is not as easy as it seems. Morris Invest shines more light on the discussion. How would absolutely not been constructed chimney, the accuracy and durability of his work depends primarily on quality of installation and profesiolizma potters.
The first step is to determine where the chimney will be erected. Do not place it at the outer wall of the house as the chimney can freeze. If you do not fulfill this caution in the winter of fireplace or stove will always go the cold air draft is insufficient, and the procedure for firing the stove, you will ruin a lot of nerves. The unit should carry out the chimney from the bottom up. Each The following piece should fit the chimney to enter the previous one, otherwise, condensation in the chimney or falling precipitation will fall on the heater.
Hood chimney mount so that the inner layer of the chimney did not fell. When the device through the chimney walls and ceilings, use fire-resistant pipes. And besides all this, the chimney must not touch home communications. The best cross-sectional shape is round the chimney. Selected shape of the section must be followed throughout the chimney, as the twists and restrictions can greatly affect the quality of tyagi.Kak right and what materials you will make a chimney, will directly depend safety and quality of all your heating sistemy.Dymohody differ in design and materials of which they consider izgotovleny.Nizhe some chimneys.