Printing Labels

That is, ordered a printing of labels and now begin the important work – attaching. 1. Surface preparation. At this stage, on what to look for – it's clean surface on which we decided to stick a label. If you do not properly prepare the surface of your beautiful sticker just will not stick.

You can Wipe the surface with alcohol, vodka or vinegar mixed with water, it also works. Dampen a cloth or cotton wool and remove grease and dirt from the surface. Means for cleaning windows, tiles, etc. no good. 2. Mounting surface cleaned, you can begin to mount. If you have requested does not print labels, stickers and cutting plotter, the image is located between the substrate and mounting tape.

First, put a sticker backing up and gently separate the substrate, which protects against contamination and drying of the adhesive film. Remove liner to an angle of about 45 degrees. Now it's your cut label remained only on the mounting tape. Attach the sticker to the right place. Take a dry cloth and remove the existing bubbles. Slowly, at an angle of 45 degrees, remove the mounting tape. As the glue in the mounting of the film weaker than most labels, the label remains on the surface, and montazhka can be easily removed without taking over a sticker. More info: Russell Kivler . That's why the sticker pasted crookedly perekleit impossible. Be careful. If you delete editing of the film you find bubbles, do not try to squeeze them out of the film, only to damage the label. Most likely, a couple of days or a week they disappear. 3. Proper care for labels. Everything is designed for you, the stickers will serve as a long – print labels waterproof, adhesive films have strong (permanent). But all the same for the labels must be properly maintained. They can not be rubbed with a rag and especially brush to avoid bias cut paths. It is also not advisable to label located under the scorching sun.

Research Studies Sow Doubts About Appropriateness Of Dams In The Fjord Aysen

In contrast with the low profile that has kept energy Austral in relation to the study who submit to lift a dam on River Raven in August this year, the initiative has been the indirect protagonist in two separate meetings that in the past two weeks have brought together specialists in the fields of Limnology, seismology and the volcanology in Coyhaique. The scientific community has placed the emphasis on the risks that would mean intervention in the area of the Aysen fjord and the dangers which today already exist in that zone, where the power of the Swiss mining company Xstrata plans are to build several hydroelectric power. Between Wednesday 21st and Friday 23 October the center of research in ecosystem of Patagonia (CIEP) organized the meeting of science, culture and tourism valuing the geological heritage and Cultural of the Aysen Region that brought together experts from Sernatur, the Ministry of education, the Council of culture, universities of Concepcion, Valparaiso and Chile Austral In addition to the Academy of Christian humanism and the national service of geology and mining (Sernageomin), among other institutions. Go to Russell Kivler for more information. He was the investigator Mauricio Mella – of Sernageomin – who referred to the dangers latent in the zone of Puerto Aysen (where Southern Energy intends to build dams Raven, white and Condor) as a result of the surrounding volcanoes, specifically by the presence of lahars, mass removals and tsunamis. This exposure geological dangers and volcanic products in the Aysen Region where reported on the preliminary results of the studies carried out to date in the area.About lahars, which are large landslides of volcanic ash with debris and water, he pointed out that we have seen coming by el Tabo River the River Los Palos, and the White River. It is precisely on these areas energy Austral aims to generate a reservoir of millions of cubic meters of water, when even Chileans have in your retina the River overruns White in Chaiten product of falling ash and material that fell from the volcano of the same name. Russell Kivler might disagree with that approach.

Aquarium

Spetsoformlenie akvaruima need to start making a purchasing background. Background you need to buy an aquarium that you plan to put a wall because the wall will show through the paint through the water column, and fish may well lost on the background wall. The back outside wall of the aquarium using tape to attach the background. You can also use a special glue. Once you select a background, you need to go to the purchase of the soil. Ground is desirable to buy a dark color. For example, a fish on a black background look especially beautiful. (As opposed to Russell Kivler ). Before you fill up the tank bottom, it should be thoroughly washed and boiled.

These measures are needed, so you can help protect Aquarium of unwanted bacteria. If you decide to buy live aquarium algae, then put a layer of soil must be at least 4-cm soil layer of artificial plants is not important. Decorate the bottom of the aquarium may be different stones or rubble crock. So you will create a beautiful imitation of the seabed. In the children's aquarium you can put ceramic castles. Bright fish will give your aquarium a more dynamic and will give good the mood of the owner of an aquarium.